Description
Sea and Sea YS01 Solis Underwater Strobe
Multiple features condensed into a compact design on the Sea and Sea YS01 Underwater Strobe
The Sea and Sea YS01 Solis Strobe has a circular beam angle of 100°x100° and guide number of up to 20.
The YS-01 Solis is a new version of a compact-type slave strobe that can be used for all applications from wide-angle to macro photography. It has been redesigned internally for greater efficiency and reliability.
With the Sea and Sea YS01 Strobe, you can switch between DS-TTL (Digital Slave TTL) and a ten-level manual control function, to enable fine adjustment of the light level according to the photographer’s intentions. You can also set up a lighting system that uses two strobes in DS-TTL mode.
Power comes from four AA batteries for a powerful and long-lasting strobe. You can enjoy taking pictures all day long without having to recharge the batteries. The recycle time takes about two seconds with nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting. The Sea and Sea YS01 Strobe is furnished with a high-luminance white LED target light (1W) indicating the optical axis of the strobe attached to its front face that is effective for night diving.
You can fully exercise your creativity with the Sea and Sea YS01 Underwater Strobe, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras.
Details of specifications of the Sea and Sea YS01 Solis Underwater Strobe.
- Strobe Guide Number (ISO 100/m) (land) is 20.
- Strobe Beam Angle is 100°x 100° (with diffuser 110°x110°).
- YS01 Batteries type is 4 x AA. Rechargeable batteries work well and for a long time!
- Number of Flashes normal AA: 230 Ni-MH: 330.
- Recycle time (full) AA: 2.5 sec. Ni-MH: 1.9 sec.
- Colour temperature is 5600K.
- Colour temperature w/diffuser is 5250K.
- Depth rating is 75m.
- Dimensions (Width x Height x Depth)] 68x108x129mm.
- Weight of strobe 450g (without batteries).
- Underwater weight is Approx.+10g (with batteries).
Unit requires a Fibre Optic Cable from the camera to trigger the Strobe to flash.
If your camera does not have a connection point for the Fibre Optic Cable, you will also need a Fibre Optic Cable Mask kit to attach it to your Camera Housing
